Get Safety Regulations of Scrap Metal Crusher Machine

Core principle of metal crushing machine is the basic principle of hammer beating. Under the driving of high-speed motor, the hammerhead on the rotor of the host hits the crushing materials by turns, and tears the crushing material into one which is in accordance with specifications through the space formed between the plate and the hammer head. And today we will mainly talk about the Safety Regulations of Scrap Metal Crusher Machine.
1, after starting, for the machine to run properly,  allowed uniform continuous feed crops.
2, metal crushing machine should pay attention to when working motor, the speed of the thresher,  voice and the temperature of the bearing.
3, feeding the operator should stand at the side of the feeding mouth, clothes should tighten sleeves, wearing masks and working cap.

4, feeding, should pay attention to the grain to see if there is stone, sickle,  tool with hard objects, such as screw, in order to avoid damage to the machine and cause accidents.
5, regulated are not allowed to hang belt machine, oiling, cleaning and troubleshooting.
6, found the following problems should be shut down engine, downtime,
7, metal crushing machine operation, the operator shall not be allowed to leave the unit, also may not be in the running teardown to observe the working condition of crushing chamber, maintenance tools shall not be on the machine or packing.
8, operators of metal crushing machine don't wear gloves, congestion occurs, it is strictly prohibited to hand in the packing in the bucket, feeding should be standing on the mill profile, in case the rebound sundry injured facial.
9, don't stop metal crushing machine immediately after work, should be idle for 2-3 minutes, so that the machine within the material discharge completely.Should be cleaned after downtime, maintenance work.
10 is the main wearing parts, hammer, wear both in same direction change the edges and back edges and switch to switch at the same time, the whole set of hammer when changing the hammer will change at the same time, a complete set of hammer rollover cannot use a single hammer.Screen surface is wearing parts, such as part of the screen surface is damaged, can fill riveting, severe damage to the need to change a new screen.
And we also have other mining machines, such as stone crusher plant, granite crusher and dry powder ball press machine and so on. If you have any other question or have an interest on our product ,you can write to us: info@sinoftm.com.

ceramsite sand making production line: http://www.fotechina.com/productline/ceramsite_sand_production_line.html